Table of Contents
Advertisement
3
Plan the TV-Hub Installation
Consider the following TV-Hub installation
guidelines.
• Select a mounting location in a dry, well-
ventilated area belowdecks away from any
heat sources or salt spray.
• Do not install the TV-Hub in an area
surrounded by metal or near any electrical
devices that emit RF noise.
• The TV-Hub can be mounted horizontally or
vertically on a flat surface (see Figure 6 and
Figure 7).
• Be sure the TV-Hub LED lights will be visible
to the user.
• Select a location that will provide adequate
clearance for the TV-Hub dimensions (see
Figure 6 and Figure 7).
• Leave enough room behind the rear panel
(horizontal mount) or below the rear panel
(vertical mount) to accommodate connecting
the cables and making service loops within
the proper bend radius.
• If you plan to use the TV-Hub's Wi-Fi
connections, ensure the TV-Hub mounting
location provides adequate Wi-Fi reception.
• If you plan to connect the TV-Hub to the
vessel's onboard local area network (LAN),
choose a location near an available Ethernet
port.
NOTE: A template showing the exact locations of the
TV-Hub mounting holes and the dimensions between
them is provided in the Welcome Kit. Installation
details are provided in
"Mount the TV-Hub" on
page
11.
Figure 6: TV-Hub Dimensions - Horizontal Orientation
LED Lights
1.73"
(4.4 cm)
9.34"
(23.7 cm)
Figure 7: TV-Hub Dimensions - Vertical Orientation
10.52"
(26.7 cm)
(23.7 cm)
7.90"
(20.0 cm)
10.94"
(27.8 cm)
4.36"
(11.1 cm)
7.90"
(20.0 cm)
LED Lights
Top View
9.34"
5
Hide quick links:
Advertisement
Table of Contents
