3.6
Keyboard Test
To execute the Keyboard Test, select 3 from the DIAGNOSTIC TEST MENU, press Enter
and follow the directions displayed on the screen. The Keyboard test contains four subtests
that test the keyboard, PS/2 mouse, and AccuPoint actions. Move the highlight bar to the
subtest you want to execute and press Enter.
Subtest 01
Pressed key display
NOTE: The Num Lock and the Overlay mode must be off to execute
this subtest.
When you execute this subtest, the keyboard layout is drawn on the display as
shown below. When any key is pressed, the corresponding key on the screen
changes to an "*" character. Holding a key down enables the auto-repeat
function which causes the key's display character to blink.
[[[
If test OK, Press [Del] [Enter] Key
420 Series
Press Key Display
]]]
3-11