Sony PCS-TL50 Operating Instructions Manual page 54

Page 2/3
Administrator Setup
Page: 2/3
Save Phone Book
Load Phone Book
Auto Dialing
Create Private Phone Book
Delete Private Phone Book
Copy to Private Phone Book
Save Phone Book
Saves the data in the Phone Book in a
"Memory Stick". The data in the "Memory
Stick" will be overwritten.
Load Phone Book
Loads the data in the Phone Book from a
"Memory Stick". The data in the Phone
Book will be overwritten.
Auto Dialing
You can create a Private Phone Book in a
"Memory Stick".
This item is used to select whether or not to
automatically dial the address of a specified
list in the Private Phone Book simply by
inserting the "Memory Stick".
On: Enables automatic dialing.
Off: Disables automatic dialing.
Create Private Phone Book
Selects to create an empty folder and file for
a Private Phone Book in an inserted
"Memory Stick".
Delete Private Phone Book
Selects to delete the Private Phone Book
folder in the inserted "Memory Stick".
Copy to Private Phone book
Selects to copy all the contents of the Phone
Book to a Private Phone Book in the inserted
"Memory Stick".
54
Registering Local Information
On
Save Cancel
Page 3/3
Administrator Setup
Page: 3/3
Web Monitor
Web Access
Save Setup
Load Setup
Function Extension Command
Web Monitor
Selects whether or not to permit monitoring
of the JPEG images of this System via a Web
browser.
On: Permits monitoring via a Web browser.
Off: Disables monitoring.
Web Access
Selects whether or not to permit accessing
the PCS-TL50 via a Web browser or Telnet.
Disabled: Prohibits accessing via a Web
browser or Telnet.
Enabled: Permits accessing via a Web
browser or Telnet.
Save Setup
Saves the setup data in a "Memory Stick".
The setup data in the "Memory Stick" will
be overwritten.
Notes
• Periodical saving of the setup data using this
feature is recommended.
• Data of the Phone Book cannot be saved with
this feature.
Load Setup
Loads the setup data from a "Memory
Stick". The setup data in the system will be
overwritten.
Note
When saving and loading the setup data, make
sure that the version of the terminal from which
the data was originally saved is the same as the
version of the local terminal. If the versions
differ, the data may not be properly recognized.
On
Enabled
Save Cancel