Sony PCS-TL50 Operating Instructions Manual page 184

3
Press the ENTER button on the Remote Commander.
The chair control is activated and you can control up to 99 terminals. The chair
control feature is canceled if you set "Broadcast Mode" to "Chair Release".
Note
When you operate incorrectly, the message "MCU operation rejected." will appear
on the display.
Displaying the picture of the selected terminal
1
Open the Display Control menu.
2
Use the V, v, B or b button to select "Receive" under "Broadcast Mode".
3
Use the V, v, B or b button to select the number of the terminal you want
to view in the box under "Terminal", then press the ENTER button.
The picture of the selected terminal is displayed on the local display.
Notes
• When no terminal is selected, the picture of the smallest terminal number will be
displayed.
• The terminal number is assigned to a terminal based on the information on each
terminal obtained from the MCU.
To broadcast the selected picture to all terminals
1
Open the Display Control menu.
2
Use the V, v, B or b button to select "Broadcast" under "Broadcast Mode".
3
Use the V, v, B or b button to select the number of the terminal you want
to broadcast in the box under "Terminal", then press the ENTER button.
The picture of the selected terminal is displayed on the local display and is
broadcast to all terminals.
To broadcast a local picture to all terminals
1
Open the Display Control menu.
2
Use the V, v, B or b button to select "Broadcast" under "Broadcast Mode".
3
Use the V, v, B or b button to display "0" in the box under "Terminal",
then press the ENTER button.
The local picture is broadcast to all terminals. The
the display.
184
Connecting the External MCU
indicator is shown on