Sony PCS-TL50 Operating Instructions Manual page 145

RGB B: Select the picture from the computer connected to the RGB IN B
connector.
3
Press the ENTER button on the Remote Commander.
The indicator of the RGB A or RGB B button on the upper panel of the Data
Solution Box lights according to the selected input.
Note
Even if you select the input with the buttons on the Data Solution Box, the display in
the Video Input Select menu will not change.
To transmit a picture from a computer connected to the Data Solution Box
Press the SEND button on the upper panel of the Data Solution Box.
The indicator on the SEND button lights and the picture of the selected
equipment is displayed on the projector or the Video Communication System
connected to the RGB OUT connector on the Data Solution Box. While in
communication, the picture selected on the Data Solution Box is transmitted to
the remote party simultaneously.
Such computer picture is displayed without any conversion as input to the Data
Solution Box. The detailed portion of the picture transmitted to the remote
party may not be clearly seen and the number of frames may be reduced.
For details on picture quality, see "Picture quality of the data solution box"
on page 146.
For transmission of a computer picture using the Remote Commander, see
page 132.
Using Audio/Video Signal from the Connected Equipment for a Conference
Video Input Select
Far DSB Input
Main RGB A
RGB A
RGB SELECT
SEND RGB B
SEND button
RGB IN A RGB IN B
145