Sony PCS-TL50 Operating Instructions Manual page 203

Notes
• "Resume Call" is not available on the remote terminal in the hold mode. Only
"Disconnect" is available on that terminal.
• If you operate the system to transfer a call during transmission or reception of the
data via the Data Solution Box or reception of the White Board image, the
transmission or reception is cancelled and will not be restored after call transfer
is completed.
The following submenu appears on the display of the local system.
1 2
Bob John
3
When the remote party to whom you want to transfer the call is registered
in the One Touch Dial List, press One Touch Dial button 1 to 6 on the
Remote Commander. If you transfer the call to the remote party not
registered in the One Touch Dial List, select "Phone Book" or "Detailed
Dial" using the V, v, B or b button on the Remote Commander, then press
the ENTER button.
4
Select the remote party from the Phone Book or by using the Detailed Dial
menu, then select "Dial", if you select "Phone book" or "Detailed Dial" in
step 3.
For details, see "To call a remote party using One Touch Dial" (page
196), steps 2 and 3 in "To call a remote party registered in the Phone
Book"(page 196) or steps 2 to 4 in "To call a remote party not registered
in the Phone Book"(page 197).
Note
You can transfer a call to the remote parties with "Line I/F" set to "SIP" only.
When the system connects to the selected remote party, the picture of the
remote site and the message "Call will be transferred upon disconnection"
appear on the display.
Phone Book
Detailed Dial
Cancel
3 4 5
OSAKA NEW YORK
Starting a Videoconference Using SIP
6
203