HYT TC-610P Service Manual page 86

Rotate the Channel
Selector Knob to CH5
and press PTT to enable
this function. Select the
wide band and low
frequency.
ATIS /
HDC1200
Deviation
Press PTT to switch
among frequencies
(medium -low, medium,
medium -high and high).
Rotate the Channel
Selector Knob to CH9
and select VOX Level 1.
Press SK1 or SK2 to
enable this function.
VOX
Rotate the Channel
Selector Knob to CH10
and select VOX Level 2.
Press SK1 or SK2 to
enable this function.
Communication
Test Set
Antenna
BPF:
<20Hz-300Hz
Communication
Test Set
BPF:
<20Hz-15kHz
AF: 1kHz
10mV
Antenna
Earpiece
Jack
Communication
Test Set
BPF:
<20Hz-15kHz
AF: 1kHz
6mV
84
TC-610P Service Manual
Press SK1 or SK2
to adjust MSK
deviation, and rotate
the Channel
Selector Knob to
save it.
SK1
Press SK1 or SK2
SK2
to adjust MSK
deviation, and rotate
the Channel
Selector Knob to
save it.
Apply SK1 or SK2
to perform
adjustment, and
rotate the Channel
Selector Knob to
save it after
one-point
SK1 adjustment.
SK2 Apply SK1 or SK2
to perform
adjustment, and
rotate the Channel
Selector Knob to
save it after
one-point
adjustment.
3KHz
1..5KHz