HYT TC-610P Service Manual page 6

Transmitting
Receive
Scan
Writing/Reading
Adjust Power Level
VOX
Encoding HDC1200 PTT ID
Decoding 2-Tone
Red LED glows.
When TOT timer expires, the radio sounds beep tone
continuously.
A TOT pre-alert tone sounds before the TOT timer expires.
LED glows green when carrier is present.
Green LED flashes once every 1 second, while scanning is in
process.
Scan Start Alert (enabled/disabled by your dealer): a beep is
heard.
Scan End Alert (enabled/disabled by your dealer): a beep is
heard.
Prioprity Scan Alert (enabled/disabled by your dealer): one
beep is heard if the radio is currently on a priority channel.
LED flashes red during reading.
LED flashes green during writing.
A low-pitched tone is heard when the radio switches from high
power to low power.
A high-pitched tone is heard when the radio switches from low
power to high power.
A high-pitched tone is heard when the VOX function is
enabled.
A high-pitched tone is heard when the VOX function is
disabled.
Red LED glows.
The radio sounds beep tone continuously when encoding.
A short beep is heard when encoding is complete.
When 2-Tone signaling is decoded successfully, the radio
flashes orange LED and sounds alert tone.
4
TC-610P Service Manual