Samsung OfficeServ 7200-S General Description Manual page 45

Home Page
Store Caller ID Number
At any time during an incoming call that provides Caller ID information, you may press the STORE key. This
saves the Caller ID number as a speed dial number in your personal speed dial list.The system must be using
LCR to dial the stored number.
Inquire Park / Hold
Having been informed that an incoming call is on hold or has been parked, you may view the Caller ID infor-
mation before you retrieve the call. This will influence how you choose to handle the call.
Caller ID Review List
This feature allows display keyset users to review Caller ID information for calls sent to their stations. This list
can be from ten to fifty calls in a first in, first out basis. The list includes calls that you answered and calls that
rang your station but that you did not answer. When reviewing this list, you can press one button to dial the
person back.The system must be using LCR to dial the stored number.There is also an option called CID REVW
ALL in the User ON/OFF options. When set to ON the feature will operate the same as described. However,
when set to OFF only calls that are not answered (missed calls) at the station will be recorded in the Review
list.
Investigate
This feature allows selected stations with a special class of service to investigate any call in progress. If Caller
ID information is available for an incoming call, you will know to whom this station user is speaking. On out-
going calls, you can see who was called. After investigating, you may barge-in on the conversation, discon-
nect the call or hang up.
Abandon Call List
The system has a system-wide abandon call list that stores Caller ID information for calls that rang but were
not answered. The list is accessed using the administrator's passcode. When reviewing this list, you are pro-
vided options to CLEAR the entry or DIAL the number.You can see the NND key to toggle between the Caller
ID name, number and the date and time the call came in.The system must be using LCR to dial numbers from
the abandon call list. The abandoned call list will store up to 100 unanswered calls.
Caller ID ON SMDR
The Station Message Detail Records report can be set to include Caller ID name and Caller ID number for
incoming calls. This format expands the printout to 113 characters. Use a wide carriage printer or an 80 col-
umn printer set for condensed print.
Number to Name Translation
The system provides a translation table for 1000 entries. When the Caller ID number is received, the table is
searched. When a match is found, the system will display the corresponding name.
Caller ID to PSTN
When calling out on ISDN-PRI services, each station can be programmed to send any one of the listed direc-
tory numbers provided on the PRI circuit. Examples are: the main number, another number or an individual
DID number. (PSTN=Public Switch Telephone Network) In addition, keysets can be configured to block Caller
ID delivery to the PRI. This will alert the provider that the call number should be restricted, allowing a keyset
to make calls that will display as "Anonymous" ,"Restricted" , or "Unavailable" to the called party. This blocking
can be set for each keyset, and is not user-configurable. This means that when enabled, all calls will show as
blocked.
4.11