Scan To E-Filing; Scan To File - Toshiba e-STUDIO287CS User Manual

BASIC OPERATION
The available settings in the scan mode and their factory
defaults are listed in the table below.
Settings
Color Mode
Resolution
Original Mode
Rotation
Single/2-sided Scan
Original Size
Compress
Omit Blank Page
1
Outside Erase
Range Adjustment
Exposure
Contrast
Background Adjustment
Sharpness
Saturation
RGB Adjustment
2
Red (R)
Green (G)
Blue (B)
Memo
• To display a list of the selected options for scan settings,
press [SETTINGS].
 P.75 "Viewing Touch Panel for Scan Menu"
3
• The default settings can be changed using the [USER
FUNCTIONS] button on the control panel.

Scan to e-Filing

With this function, you can scan originals and store the scans
in e-Filing boxes. You can scan 200 pages per job.
4
When saving your scans, you can specify a public box or one
of the user boxes. The public box is a pre-defined box and is
used to store documents that any users of the equipment may
need to work with. A user box is one created by the user. If a
password has been set for a user box, you need to enter the
correct password to access it.
The stored data can be printed out any time from the touch
5
panel. You can also manage the data using the e-Filing web
utility. With the e-Filing web utility, you can create user boxes
and folders, print documents, and even merge several
documents to create a new one.
For instructions on how to store your scans with Scan to e-
Filing, create user boxes, and print e-Filing documents, refer to
the e-Filing Guide.
6
Note
• The maximum capacity in e-Filing differs depending on your
model or operating environment. The total available space
in e-Filing and the shared folder can be checked on the
[Device] tab in TopAccess.
• Before saving your scans in a user box, you need to set up
the user box.
Factory Defaults
BLACK
200 (dpi)
TEXT
90 (degrees)
SINGLE
AUTO
MID
OFF
OFF
±0
AUTO
±0
±0
±0
±0
±0
±0
±0
• To prevent loss of data, we recommended that you back up
the data saved in the equipment's hard disk. You can back
up the data with the computer using File Downloader or e-
Filing Backup/Restore Utility.
• Delete documents stored in e-Filing when they are no longer
needed.

Scan to File

The Scan to File function sends and stores scans to a shared
folder in the equipment's hard disk or a specified network
folder. The data stored in the shared folder can be accessed
directly from the computer via a network.
You can scan up to 1000 pages per job until the equipment's
memory is full.
The network administrator has to make settings for storing the
scanned data to the client computers. For details, refer to the
TopAccess Guide.
Note
• The maximum capacity in the shared folder differs
depending on your model or operating environment. The
total available space in the shared folder and e-Filing can be
checked on the [Device] tab in TopAccess.
• The shared folder in the equipment's hard disk can contain a
maximum of 2000 files.
• We recommend that you back up the data stored in the
shared folder.
• Delete documents stored in the shared folder when they are
no longer needed.
Scanning to files
1
Place the original(s).
2
On the control panel, press the [SCAN]
button to enter the SCAN menu.
3
Press [FILE].
- 76 -