Specifying The Recipient - Toshiba e-STUDIO287CS User Manual

 Changing the settings for each page
You can change the scanning conditions (RESOLUTION,
MODE, EXPOSURE and ORIGINAL) for each page.
1
Specify the recipients and press [SEND] to
start scanning a document. When the
scanning of the original is completed, the
confirmation screen for the next original is
displayed. Press [OPTION].
The illustration above shows the original placed on the
original glass. If you place an original on the RADF
(Reversing Automatic Document Feeder) and press the
[CONTINUE] button during scanning, the confirmation
screen for the next original is displayed after the scanning
is completed. If you press the [STOP] button during
scanning, the scanning halts and the confirmation screen
for the next original can be displayed.
2
The setting screen for the scanning
conditions is displayed. Change the setting,
and then press [OK].
P.61 "Making settings"


Specifying the recipient

There are various ways to specify the recipient, such as Direct
entry with the control panel and Address book entry.
Memo
• To use the address book, you need to register recipients' fax
numbers to the book in advance. For details of the
operation, refer to the Advanced Guide or TopAccess
Guide.
 Direct entry with digital keys
You can specify the recipient by entering its fax number on the
control panel.
1
Press [INPUT FAX No].
2
Key in the recipient's fax number and press
[OK].
• You can also enter the recipient's address with the
digital key on the control panel.
• To delete the entered fax number one number at a
time, press [BACK SPACE].
• To delete the entire entered fax number in one go,
press the [CLEAR] button.
- 63 -
SENDING/RECEIVING A FAX
1
2
3
4
5
6