Table of Contents
Advertisement
2-2 Loading and Cutting Off Media
6.
Prepare the media for take-up on the paper pipe.
Use adhesive tape to fasten the media securely to the paper pipe.
Apply adhesive tape at about five evenly spaced locations.
Secure the center of the media in place while keeping the media stretched taut to keep it free
of slack.
While pulling the media, working from the center toward the outer sides, secure the media it
place at intermediate locations between the center and the left and right edges.
Line up the left and right edges of the media with the guide marks on the paper pipe and secure
the media in place.
Take-up with outward curl
Paper pipe
Take-up with inward curl
Paper pipe
42
Chapter 2 Operation
Adhesive tape
Apply, working from the center out.
1
2
3
Adhesive tape
Apply, working from the center out.
1
2
3
Make sure the edges of the
media are aligned with the
guide marks on the paper pipe.
Ensure there is
no slack.
Ensure there is
no slack.
Advertisement
Table of Contents
