Sony DCR-TRV240 Service Manual page 34

DCR-TRV240/TRV340
Viewing images recorded on a tape on your computer
(Windows users only)
Windows 2000 Professional
6 Set the POWER switch to OFF (CHG) on your camcorder, and then disconnect
the USB cable.
7 Restart your computer.
Step 2: Install the USB driver on the CD-ROM
Perform the entire procedure described in "Installing the USB driver" on page 95.
98
Viewing images recorded on a tape on your computer
(Windows users only)
Capturing images with "PIXELA ImageMixer Ver.1.0 for Sony"
To use this software in Windows 2000 Professional, you must be authorized as a Power
User or Administrator. For Windows XP, you must be authorized as an Administrator.
Viewing images
Viewing images recorded on a tape
(1) Turn on your computer and allow Windows to load.
(2) Connect one end of the USB cable to the
the other end to the USB connector on your computer.
(3) Connect the AC power adaptor to your camcorder and then to a wall outlet,
and insert a cassette into your camcorder.
(4) Set the POWER switch to VCR.
Select USB STREAM to ON in
(5) Select "Start" t "Program" t "PIXELA" t "ImageMixer" t "ImageMixer
Ver.1.0 for Sony" on Windows.
100
Windows XP
(USB) jack on your camcorder and
(USB) jack
USB connector
USB cable
in the menu settings (p. 104).
Viewing images recorded on a tape on your computer
(Windows users only)
Installing "PIXELA ImageMixer Ver.1.0 for Sony"
Install "PIXELA ImageMixer Ver.1.0 for Sony" on your computer. "PIXELA
ImageMixer Ver.1.0 for Sony" is packaged on the CD-ROM supplied with your
camcorder. "PIXELA ImageMixer Ver.1.0 for Sony" allows you to easily view images on
your camcorder on your computer for your enjoyment.
To install and use this software in Windows 2000 Professional, you must be authorized
as a Power User or Administrator. For Windows XP, you must be authorized as an
Administrator.
(1) Turn on your computer and allow Windows to load.
If you are using your computer, close all running applications.
(2) Insert the supplied CD-ROM into the CD-ROM drive of your computer.
The application software screen appears. If the application software screen
does not appear, double-click "My Computer" and then "ImageMixer" (CD-
ROM Drive). The application software screen appears after a while.
(3) Move the cursor to "PIXELA ImageMixer" and click.
The language selection dialog box appears.
(4) Select the language for installation.
(5) Follow the on-screen messages.
Follow the directions on the screen to install DirectX. DirectX 8.0 will be installed.
Viewing images recorded on a tape on your computer
(Windows users only)
(6) Click on the screen.
The "PIXELA ImageMixer Ver.1.0 for Sony" startup screen appears on your
computer.
(7) Click .
Preview window
(8) Start playback on your camcorder.
The image from the tape appears in the preview window.
1-24
99
101