OfficeServ 7200 General Description Guide
5.1
Wireless LAN Base Station (WBS24)
The WBS24 consists of both wired and wireless processing parts. WBS24s are nor-
mally referred to as Access Points (APs).
The wired processing part has an ISDN BRI interface connected with the Office-
Serv 7200 and an IEEE 802.3 Ethernet interface connected with the LAN. The wire-
less processing part has an IEEE 802.11b standard and wireless LAN RF interface with
a wireless frequency band of 2.4 GHz.
The wired Ethernet interface is connected with the LAN (based on 10Base-
T/100Base-Tx) and transmits/receives data, e.g., Internet access, other than voice.
The wireless processing part transmits/receives voice data for wireless voice calls
and also accesses the wireless Internet. The maximum transmitting speed on the wire-
less section is 5~6 Mbps. About 20 people can simultaneously access the wireless Inter-
net using a WBS24.
5.2
Mobile Station (WIP-5000M)
The WIP-5000M (Wireless IP-Phone Mobile type) uses the wireless LAN
(IEEE802.11b) to allow users to make calls. The WIP-5000M supports hand-over
when moving between APs. Data terminals such as laptops can also be used where the
wireless LAN is enabled. The WIP-5000M also performs the message service func-
tions supported by the OfficeServ 7200 system.
© Samsung Business Communications
CHAPTER 2. OfficeServ 7200 Hardware
Figure 2.19 WBS24
Figure 2.20 WIP-5000M
Page 2-33