Figure 2.1 Officeserv 7200 Chassis Configuration; Table 2.1 Modules That Can Be Mounted In The Slots - Samsung OfficeServ 7200 General Description Manual

OfficeServ 7200 General Description Guide
Front View of
the Expansion
Chassis
Front View of
the Basic Chassis
Chassis
Basic
Chassis
(OfficeServ
Access)
Expansion
Chassis
(OfficeServ
Expansion)
The WIM module can be mounted only in Slot 1 of the basic and expansion
chassis.
The TEPRI module can be mounted only in Slots 3, 4, and 5 of the basic chas-
sis and Slot 3 of the expansion chassis.
The LIM module cannot be mounted in Slot 1 of the basic/expansion chassis.
© Samsung Business Communications
Slot 0
Slot 3
Slot 0
Slot 3

Figure 2.1 OfficeServ 7200 Chassis Configuration

Table 2.1 Modules that can be Mounted in the Slots

Slot
Slot 0 MCP only
Slot 1 All modules except for MCP, LCP, TEPRI, and LIM
Slot 2 All modules except for MCP, LCP, TEPRI, and WIM
Slot 3 All modules except for MCP, LCP, and WIM
Slot 4
Slot 5
Slot 0 LCP only
Slot 1 All modules except for MCP, LCP, TEPRI, and LIM.
Slot 2
Slot 3 All modules except for MCP, LCP, and WIM
Slot 4 All modules except for MCP, LCP, TEPRI, and WIM
Slot 5
About the Managed LIM
The Managed LIM is controlled by the WIM. It provides expanded functions for the
management of Layer2 QoS (e.g. 802.1p (packet priority), 802.1q(VLAN), and
IGMP snooping) as well as Layer 2 switching.
CHAPTER 2. OfficeServ 7200 Hardware
Slot 1
Slot 2
Slot 4
Slot 5
Slot 1
Slot 2
Slot 4
Slot 5
Mountable Modules
Page 2-3