Interfaces; Interfaces Between The Sub-Modules; Table 1.1 Interfaces Between The Sub-Modules - Samsung OfficeServ 7200 General Description Manual

CHAPTER 1. Introduction to the OfficeServ 7200
2

Interfaces

This section describes the interfaces between the sub-modules of the OfficeServ
7200 and those between the VoIP elements.
2.1

Interfaces between the Sub-Modules

Type
LIM Interface
WIM Interface
PSTN Interface
ISDN Interface
xDSL/Cable Modem
Interface
Voice Terminal Inter-
face
Interface between
the call server and
data server
Interface between
the call server and
SIP server
Interface between
the call server and
system manager
Page 1-6

Table 1.1 Interfaces between the Sub-Modules

Classification
Physical Connection IEEE 802.3 10Base-T, IEEE 802.3u 100Base-Tx
Connector Type RJ-45 16 port
Physical Connection IEEE 802.3 10Base-T, IEEE 802.3u 100Base-Tx, V.35
Connector Type RJ-45, serial 26-pin connector (non-standard cable)
Access Protocol PPPoE, PPP, DHCP, HDLC, Frame Relay
Physical Connection T1, E1, Foreign Exchange Office (FXO)
Connector Type RJ-45
Access Protocol T1, E1, Loop Start
Physical Connection ISDN PRI, ISDN BRI
Connector Type RJ-45
Access Protocol ISDN PRI, ISDN BRI
Physical Connection IEEE 802.3u 100Base-Tx Ethernet
Connector Type RJ-45
Access Protocol PPPoE, DHCP
Analogue Phone Foreign Exchange Station (FXS)
Digital Phone Samsung digital phone
Wireless LAN Access 802.11b, WBS24 (Samsung wireless LAN AP)
Point AP)
Physical Connection 100Base-Tx Ethernet
Signal Processing TCP/IP
Access Protocol UDP IPC
Physical Connection 100Base-Tx Ethernet
Signal Processing SIP
Access Protocol User Agent (UA) to UA
Physical Connection 100Base-Tx Ethernet
Signal Processing TCP/IP
Access Protocol TCP, UDP IPC
OfficeServ 7200 General Description Guide
Interface
© Samsung Business Communications