Call Barring Override By Account Codes - Panasonic KX-TA624 Installation Manual

C

Call Barring Override by Account Codes

Allows an extension user to override call barring temporarily to make a toll call from a
toll-restricted extension. The user can carry out this feature by entering one of the account
codes programmed in [310] "Account Codes" before dialling the telephone number. The
user can make a toll call with the COS number 2.
• The account code "Verify-toll (call barring)" mode at an extension permits users to
!
!
override their call barrings.
• This feature can be used on extensions assigned to call barring COS numbers 3 through
5. The COS numbers 1 and 2 will not be changed.
• If the user does not enter an account code or enters an invalid one, a regular call barring
check is done.
• When a user makes a call using this feature, it will appear on the SMDR printout with
either the entered 4-digit account code or the 2-digit index of the entered account code.
This selection is set in program [805].
• Users can also override call barring of another extension by using the Walking COS
feature.
Flow chart of Call Barring Override
Option/Forced
• Required System Programming
[310] Account Codes
[605] Account Code Entry Mode
[805] SMDR Account Codes Selection
• Related Feature References
Account Code Entry, Call Barring, Station Message Detail Recording (SMDR),
Walking COS
3-14
Features
Call Barring Override by Account Codes is attempted.
What is the account code mode?
Verify–Toll
Does the entered code match
a stored account code?
No
Yes
Is the COS number 1?
Yes
No
The call is made with the
COS number 2.
The Call Barring COS
number remains the same as
the extension being used.
3 Features
Verify–All
Does the entered code match
a stored account code?
Yes No
The call is not allowed.
A reorder tone is
returned to the user.