Fuses; Main Fuse Removal; Fuse Inspection - Dinli DL-801 Service Manual

Fuses

Main Fuse Removal

● Remove the seat (see Frame chapter)
● Remove the fuse case cap [A] and take out the fuse [B].

Fuse Inspection

● Inspect the fuse element [A]
If it is blown out, replace the fuse. Before replacing a blow
★
fuse, always check the amperage in the affected circuit. If
the amperage is equal to or greater than the fuse rating,
check the wiring and related components for a short
circuit.
CAUTION
When replacing a fuse, be sure the new fuse
matches the specified fuse rating for that circuit.
Installation of a fuse with a higher rating may cause
damage to wiring and components.
ELECTRICAL SYSTEM
【7-17】