Steering Lubrication; Steering Stem Clamp Inspection; Tie-Rod End And Steering Knuckle Joint Inspection - Dinli DL-801 Service Manual

Steering Lubrication

●Lubricate the steering stem clamps.
○Remove the steering stem (see Steering Stem Removal).
○Wipe all the old grease off the steering stem, and clamps,
and out of the grease seals.
○Apply grease to the steering stem [A], grease seal lips and
mating surface [B] of the clamp, and pack the grooves [C]
in the clamp with grease.

Steering Stem Clamp Inspection

●Inspect the steering stem clamps [A].
If roughness, excessive play, or seizure is found, replace
★
both clamps.

Tie-Rod End and Steering Knuckle Joint Inspection

●Inspect each spherical bearing [A].
If roughness, excessive play, or seizure is found, replace
★
the tie-rod end, or steering knuckle joint.
If damage, wear or deterioration is found, replace the
★
tie-rod end.
SUSPENSION/STEERING
【4-9】