Fuses; Main Fuse Removal; Fuse Inspection - Dinli DL-702 2008 Service Manual

ELECTRICAL SYSTEM
Fuses
Main Fuse Removal
● Remove the seat (see Frame chapter)
● Remove the fuse case cap [A] and take out the fuse [B].
Fuse Inspection
● Inspect the fuse element.
If it is blown out, replace the fuse. Before replacing a blow fuse,
always check the amperage in the affected circuit. If the
amperage is equal to or greater than the fuse rating, check the
wiring and related components for a short circuit.
When replacing a fuse, be sure the new fuse matches the
specified fuse rating for that circuit. Installation of a fuse with a
higher rating may cause damage to wiring and components.
CAUTION
【7-30】
A
B