Belkin N1 MIMO Wireless User Manual page 78

Manually Configuring Network Settings
Manually Configuring Network Settings in Windows 98 or Me
1.
.. Right-click.on."My.Network.Neighborhood".and.select."Properties".
from.the.drop-down.menu.
2.
.. Select."TCP/IP.Settings".for.your.installed.network.adapter.. .
You.will.see.the.following.window.
(1)
(2)
3.
.. If."Specify.an.IP.address".is.selected,.your.Modem.Router.will.
need.to.be.set.up.for.a.static.IP.connection.type..Write.the.
address.information.in.the.table.below..You.will.need.to.enter.this.
information.into.the.Modem.Router.
4.
.. Write.the.IP.address.and.subnet.mask.from.the."IP.Address".tab.
5.
.. Click.the."Gateway".tab
down.in.the.chart.
6.
.. Click.the."DNS.Configuration".tab.
the.chart.
7.
.. If.not.already.selected,.select."Obtain.IP.address.automatically".on.
the.IP.address.tab..Click."OK".
Restart the computer. When the computer restarts, your network
adapter(s) are now configured for use with the Modem Router.
(3)
(2)
..Write.the.gateway.address. .
(1)
..Write.the.DNS.address(es).in.
76 76
1
2
3
4
5
6
7
8
9
10
(3)
.