Belkin N1 MIMO Wireless User Manual page 31

Alternate Setup Method
Setting your ISP Connection Type to PPPoE or PPPoA
PPPoE.(Point-to-Point.Protocol.over.Ethernet).is.the.standard.method.of.
connecting.networked.devices..It.requires.a.user.name.and.password.to.
access.the.network.of.your.ISP.for.connecting.to.the.Internet..PPPoA.(PPP.
over.ATM).is.similar.to.PPPoE,.but.is.mostly.implemented.in.the.UK..Select.
PPPoE.or.PPPoA.and.click."Next"..Then.enter.the.information.provided.by.
your.ISP,.and.click."Apply.Changes".to.activate.your.settings.
1. User Name
2. Password
.-.Enter.your.password..(Assigned.by.your.ISP).
3. Retype Password
4. VPI/VCI
-.Enter.your.Virtual.Path.Identifier.(VPI).and.Virtual.Circuit.
Identifier.(VCI).parameter.here..(Assigned.by.your.ISP).
. Note:. Australia.
. .
. New.Zealand. VPI.=.0.
. .
-.Enter.the.user.name..(Assigned.by.your.ISP).
-.Confirm.the.password..(Assigned.by.your.ISP).
VPI.=.8.
VCI.=.35.
VCI.=.100
29
.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)