Troubleshooting - US Robotics Wireless 54Mbps ADSL Router User Manual

This section describes common problems you may encounter and
possible solutions to them. The ADSL Router can be easily monitored
through panel indicators to identify problems.
The Power LED is not illuminated.
Possible Solution
Check connections between the ADSL Router, the external power
supply, and the wall outlet.
Possible Solution
If the power indicator does not turn on when the power cord is
plugged in, you may have a problem with the power outlet, power
cord, or external power supply. However, if the unit powers off after
running for a while, check for loose power connections, power losses,
or surges at the power outlet.
If you still cannot isolate the problem, then the external power supply
may be defective. In this case, contact Technical Support for
assistance.
The Link LED is not illuminated.
Possible Solution
Verify that the ADSL Router and attached device are powered on.
Be sure the cable is plugged into both the ADSL Router and the
corresponding device.
Possible Solution
Verify that the proper cable type is used and that its length does not
A
T
ROUBLESHOOTING
PPENDIX
A
63