Installation - US Robotics Wireless 54Mbps ADSL Router User Manual

USR5473 Package Contents
USR9110 Wireless 54Mbps ADSL Router
12VDC Power Supply
Installation Guide
Prepare for Installation
Note: It is important that you have your serial number written down
before you install the Wireless 54Mbps ADSL Router. You can find
your serial number on the bottom label of the Wireless 54Mbps ADSL
Router. If you ever need to call our Technical Support department, you will
need this number to receive assistance.
Model Number
USR9110
Note: Be sure to find out what letter your CD-ROM drives uses before
you begin installing your new product. You will need to know this to
properly install your software.
Step One: Connect Microfilter(s) (if included or required by your ISP)
A microfilter removes interference between voice and DSL signals. Your ISP
will determine if a microfilter is necessary. If a microfilter was not included
with the Wireless 54Mbps ADSL Router, ask your ISP if you need to purchase
one or more.
To install a microfilter, plug each device (phone, fax machine, or other
telephony device) into the microfilter and then plug the microfilter into the
telephone wall jack. Do not install a microfilter on the cable that will con-
nect your Wireless 54Mbps ADSL Router to the telephone jack unless your
One (1) phone cable
C
HAPTER
I
NSTALLATION
One (1) Ethernet cable
USR5422 54Mbps USB Adapter
Installation CD-ROM
Serial Number
1
3