Epson LQ-300 + Service Manual page 85

24 pins serial impact dot matrix printer
Hide thumbs Also See for LQ-300 +:
Table of Contents

Advertisement

EPSON LQ-300+
Drive PF roller
Rear driven PF roller
Figure 6-5. PF Roller Assembly
Release shaft
Paper guide assy.
Figure 6-6. Paper Guide Assembly
Maintenance
Lubricate G-26 to the shaft of the
drive PF roller and the rear driven PF
roller. (4 places)
PF roller assembly:
G-26, 1/2 grain of rice
Set the paper guide assembly upside
down and lubricate at the touching
part of the PF roller assembly with the
release shaft. (4 places)
Paper guide assembly:
G-26, 1 grain of rice
Maintenance
Lubricate G-26 into the hole of the
right TR (tractor) frame facing to the
TR guide shaft and the left TR frame.
Tractor assembly:
G-26, 1/2 grain of rice
Figure 6-7. Tractor Assembly
The picture at the left is the back of
Oil Pad
the printhead.
1. Set the oil dispenser 0.30ml.
2. Lubricate O-2 on the Oil pad.
Oil pad:
O-2, 0.28-0.32 cc
Note: Make sure that the setting of the oil
dispenser is correct.
Figure 6-8. Oil Pad
Revision C
80

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lq-305k

Table of Contents