Epson LQ-300 + Service Manual page 80

EPSON LQ-300+
Table 5-3. Destination Setting
Destination
EHK
ETT
ECC(Kver)
10. The following screen appears. By using
Going" and press ENTER.
11. "Main MENU" appears. By using
Adjust" and press ENTER.
Adjustment
Setting
USASTD
USASTD
DEFSTD
↑ or ↓ key to shift ">" mark, select "Out
↑ or ↓ key to shift ">" mark, select "(1) Bi-D
12. The printing mode select menu for Bi-D adjustment appears. Use
select the printing mode "Mode 1"and use
After selecting them, press SPACE. Bi-D Printing starts.
NOTE: Mode 1: Normal Draft
Mode 2: Bit Image 90 dpi
Mode 4: LQ
Overview
Revision C
↑ or ↓ key to
← or → key to change Bi-D values.
75