Epson LQ-300 + Service Manual page 25

EPSON LQ-300+
5. Select setting value with the LF/FF button.
Tear Off/ Bin LEDs and Paper Out LED show that the menu's value by status of
On/Off/Blink/2-Blinks. That value can be changed by pressing the Tear Off/ Bin
button and the LEDs, the status of On/Off/Blink/2-Blinks will be changed as the
button is pressed.
6. When the LF/FF button is pressed, the printer memorizes the last setting value.
7. Repeat (4) to (6).
The other items can be changed in the same manner.
The menu selection will return to the first menu after the last menu selection is
over.
8. Turn the printer off.
The setting is stored into non-volatile memory.
Item Setting / Value *2
3 inch, 3.5 inch, 4 inch, 5.5 inch, 6 inch, 7 inch, 8 inch, 8.5
Page length for tractor
inch, 11 inch, 70/6 inch, 12 inch, 14 inch, 17 inch
Skip over perforation OFF, ON
Auto tear off OFF, ON
Auto line feed OFF, ON
Print direction Bi-d., Uni-d., Auto
Software ESC/P2, IBM 2390 Plus
0, ∅
0 slash
High speed draft OFF, ON
I/F mode Auto, Parallel, Serial
Auto I/F wait time 10 seconds, 30 seconds
19200BPS, 9600BPS, 4800BPS, 2400BPS, 1200BPS,
Baud rate
600BPS, 300BPS
Parity None, Odd, Even, Ignore
Data length 8 bit, 7 bit
Parallel I/F bidirectional mode OFF, ON
Product Description
Item
Packet mode
Character table
International character set
for Italic table
Pitch
*1
Font
Auto CR (IBM 2390 Plus)
A.G.M (IBM 2390P plus)
Manual feed wait time
Buzzer
Roll paper
NOTE: *1: One of the founts selected in the default setting is corresponding to
others (=other font) on the control panel.
Following fonts are not selected in the default setting mode;
Draft, Draft Condensed, Roman, Sans Serif, Courier, Prestige, and
Script.
NOTE: Settings with Bold are standard factory settings.
OPERATOR CONTROLS
Setting / Value *2
Auto, OFF
Software version
Italic, PC437, PC850, PC860, PC863, PC865, PC861,
BARASCII, Abicomp, Roman8, ISO Latin 1, PC858, ISO
8859-15
NLSP version
Italic, PC437, PC850, PC437, Greek, PC853, PC855,
PC852, PC857, PC864, PC866, PC869, MAZOWIA, Code
MJK, ISO 8859-7, ISO Latin 1T, Bulgaria, PC774, Estonia,
ISO 8859-2, PC 866 LAT., PC 866UKR, PC APTEC,
PC708, PC720, PCAR 864, PC860, PC865, PC861, PC863,
BRASCII, Abicomp, Roman8, ISO Latin 1, PC858, ISO
8859-15, PC771
Italic U.S.A., Italic France, Italic Germany, Italic, U.K.,
Italic Denmark 1, Italic Sweden, Italic Italy, Italic Spain 1
10cpi, 12cpi, 15cpi, 17cpi, 20cpi, Proportional
OCR-B, Orator, Orator-S, Script C, Roman T, Sans serif H
OFF, ON
OFF, ON
1 second, 1.5 seconds, 2 seconds, 3 seconds
OFF, ON
OFF, ON
Revision C
20