Auto Check Control - Skoda Fabia Owner's Manual

Main menu
– You can activate the MAIN MENU by pressing the rocker switch
more than 1 second.
– You can select individual menu points by means of the rocker switch
A
pushbutton is briefly pressed, the information you have selected is displayed.
B
You can select the following information (depending on the equipment installed on
the vehicle):
MFD (Onboard computer)  page 19

Audio*

Navigation*

Phone*  page 105

Vehicle status  page 23

Setup  page 24

The menu point Audio is only then displayed when the factory-fitted Radio* is
switched on.
The menu point Navigation is only then displayed when the factory-fitted Navigation
system* is switched on.
Using the system Safety
Fig. 21 Information display: Control
elements
A  fig. 21
for
A
A
. When the
A
Driving Tips
Note

If warning messages are shown in the information display  page 23, these
messages can be confirmed with the button
to call up the main menu.

If you do not activate the information display at that moment, the menu shifts to
one level higher every 10 seconds.

The operation of the factory-fitted radio* or the navigation system* is described in
separate operating instructions to be found in the on-board literature.
Door, luggage compartment door and bonnet ajar warning
The door, luggage compartment and bonnet ajar warning lights up if at least one door,
the luggage compartment or bonnet are not closed. The symbol indicates which door
is still open or whether the luggage compartment door or bonnet is not closed.
The symbol goes out as soon as the doors, luggage compartment door and bonnet are
completely closed.
A warning signal sounds if the car is driven at a speed of more than 6km/hour and if
the engine or the luggage compartment door is open.

Auto Check Control

Car state
The Auto Check Control carries out a check of certain functions and vehicle compo-
nents. The check is performed constantly when the ignition is switched on, both when
the vehicle is stationary, as well as when driving.
Some operational faults, urgent repairs, service work or other information appear in
the display of the instrument cluster. The displays are shown with a red or yellow light
symbol depending on the priority of the message.
The red symbols indicate danger (priority 1) while the yellow symbols indicate a
warning (priortity 2). Information for the driver may also appear in addition to the
symbols  page 26.
General Maintenance Breakdown assistance
Instruments and warning lights
A
on the windshield wiper lever in order
B
Technical Data
23