Average Fuel Consumption - Skoda Fabia Owner's Manual

Current fuel consumption
The current fuel consumption level is shown in the display in litres/100 km. This infor-
mation can help you to adapt your style of driving to the fuel consumption you wish to
achieve.
The display appears in litres/hour if the vehicle is stationary or driving at a low speed.
The indicated value will be updated every 0.5 seconds while you are driving.

Average fuel consumption

The average fuel consumption since the memory was last erased is shown in the
 page 19, fig.
display in litres/100 km
style of driving to the fuel consumption you wish to achieve.
If you wish to determine the average fuel consumption over a certain period of time,
you must erase the memory at the start of the new measurement using the button
on the windshield wiper lever
first 100 m you drive after erasing the memory.
The indicated value will be updated every 5 seconds while you are driving.
Note
The amount of fuel consumed will not be indicated.
Range
The estimated range in kilometres is shown on the display. It indicates the distance you
can still drive with your vehicle based on the present level of fuel in the tank for the
same style of driving.
The readout is shown in steps of 10 km. After lighting up of the indicator light for the
fuel reserve the display is shown in steps of 5 km.
The fuel consumption for the last 50 km is taken as a basis for calculating the range. If
you drive in a more economical manner from this moment on, the range will be
increased accordingly.
Using the system Safety
18. This information can help you to adapt your
 page 20, fig.
19. A zero appears in the display for the
Driving Tips
If the memory is set to zero (after disconnecting the battery), the fuel consumption of
10 ltr./100 km is calculated for the range; afterwards the value is adapted accordingly
to the style of driving.
Distance driven
The distance driven since the memory was last erased appears in the display
 page 19. If you wish to calculate the distance driven as of a particular time, you must
erase the memory at this moment in time by pressing the button
 page 20, fig.
wiper lever 19.
The maximum distance indicated in both memories is 1 999 km or on vehicles with
information display*, it is 9 999 km. The indicator is set back to null if this period is
exceeded.
Average speed
A
B
The average speed since the memory was last erased is shown in the display in
km/hour  page 19. If you wish to determine the average speed over a certain period
of time, you must erase the memory at the start of the new measurement by pressing
A
the button on the windshield wiper lever
B
A zero appears in the display for the first 100 m you drive after erasing the memory.
The indicated value will be updated every 5 seconds while you are driving.
Current speed*
The current speed which is identical to the display of the speedometer, is indicated on
A  page 15, fig.
the display
2
General Maintenance
Instruments and warning lights
A
B
 page 20, fig.
19.
15.
Breakdown assistance Technical Data
21
on the windshield