Using The Self-Propel Drive - Toro 20793 Super Recycler Operator's Manual

Starting the Engine (Model
20793 only)
1. Push the ignition toggle switch to the On (I) position
(Figure 16).
Figure 16
1. Ignition toggle switch
2. Pull the recoil starter (Figure 17).
Figure 17
Note: If the mower still does not start, contact an
Authorized Service Dealer.
Starting the Engine (Model
20795 only)
Start the engine in one of 2 ways:
• Turn the ignition key to the Start position; when the
engine starts, release the key (Figure 18).
Figure 18
• Turn the ignition key to the Run position and pull the
recoil starter in the operating position (Figure 19).
• If the mower does not start in 1 or 2 pulls (or 5
seconds using the electric starter), press the primer
button 1 or 2 times and try starting it again.
Note: If the mower still does not start, contact an
Authorized Service Dealer.

Using the Self-propel Drive

To operate the self-propel drive, simply walk with your
hands on the upper handle and your elbows at your
sides, and the mower will automatically keep pace with
you (Figure 20).
Note: You can self-propel the mower with the blade
engaged or disengaged.
10
Figure 19
Figure 20