Ecg Setup Factory Defaults; Respiration Setup Factory Defaults - Escort Prism 20401 Reference Manual

ECG Setup Factory Defaults

ECG SETUP
ALARMS
ALARM LEVEL
LATCH ALARMS
HIGH LIMIT
LOW LIMIT
RCD ON ALARM
FILTER
SIZE VCTR 1
SIZE VCTR 2
SWEEP SPEED
PACE DETECT
LEAD SELECT
5 LEAD
QRS TONE
WAVEFORM ON
PRAM COLOR

Respiration Setup Factory Defaults

RESPIRATION
SETUP
ALARMS
ALARM LEVEL
LATCH ALARMS
HIGH LIMIT
LOW LIMIT
PRAM AVAIL
PRAM ON/OFF
RCD ON ALARM
RESP SIZE
SWEEP SPEED
APNEA DELAY
APNEA ALM LVL
CVA
TONE
CRG SCALES
PRAM COLOR
ADULT PED
ON ON
2 2
OFF OFF
140 180
50 80
WF WF
ON ON
1.00 0.80
1.00 0.80
25 25
OFF OFF
II II
OFF OFF
OFF OFF
ON ON
GREEN GREEN GREEN
ADULT PED
OFF ON
2 2
OFF OFF
OFF OFF
5 5
ON ON
OFF OFF
WF WF
1.00 0.77
12.5 12.5
20 20
2 2
ON ON
OFF OFF
ON ON
CYAN CYAN CYAN
6-3
NEO DESCRIPTION
ON Enables ECG alarms
2 Sets alarm priority level (1, 2, or 3)
OFF Latches the ECG alarms until reset
200 High alarm limit setting
100 Low alarm limit setting
WF Record when ECG alarm enabled
ON ECG filter enable
0.80 3 lead select size
0.80 5 lead select size
25 Waveform speed
OFF Pacer detection enable
II Lead select I, II, III, or V
OFF 5 lead mode enable
OFF QRS detect tone
ON ECG waveform enable
Sets on-screen color of parameter
NEO DESCRIPTION
ON Enables respiration alarm
2 Sets alarm priority level (1, 2, or 3)
Latches the Respiration alarms until
OFF
reset
OFF High alarm limit setting
5 Low alarm limit setting
ON Respiration enable or disable
OFF Respiration standby
WF Record when Resp alarm enabled
0.57 Respiration waveform size
12.5 Respiration waveform speed
20 Time delay for apnea alarm
2 Sets alarm priority level (1, 2, or 3)
ON Artifact detection
OFF Respiration Rate tone
ON OXYCRG scales enable
Sets on-screen color of parameter