Multiparameter Module
The Multiparameter Module is configured for several parameters; however your Multiparameter
Module may be configured for fewer parameters. The parameters include ECG, SPO
, IBP
2
(Invasive Blood Pressure), NIBP (Noninvasive Blood Pressure), Respiration, ETCO
,
2
Cardiac Output, Temperature and SureTemp. This module may be interchanged with any
Prism monitor.
Dual Channel Recorder Module
The Recorder module provides manual and alarm recordings of any one or two waveforms
simultaneously.
Serial Interface (ISP Port)
This port is located inside the MPM well and is used to upload and download software data from
external sources. Only Prism LCD models 20403 with CPU Board assembly 403950 has ISP
capability.
VGA Output Connector
The VGA OUTPUT port allows for an external VGA monitor to be connected. The same
information that is displayed on the Prism monitor will display on the external VGA monitor. See
the following.
1-18