Exit Solenoid Assembly - Xerox Phaser 3500 Service Manual

Exit Solenoid Assembly

1. Remove:
Covers on page 4-4
■
■ Left Cover on page 4-5
■ Top Cover on page 4-8
2. Disconnect the connector running to the main board.
3. Remove 3 screws securing the solenoid to the printer.
4. Remove the solenoid assembly.
Note:
There is a resistor attached by the upper right hand screw. When reassembling the
printer, ensure the resistor is in place.
Phaser® 3500 Laser Printer Service Manual
4-38
Repairs and Adjustments
Exit Solenoid
Ass'y
s3500-099