Xerox Phaser 3500 Service Manual page 22

Main Menu Sub Menu
DEV Motor
Laser
Motor
Duplex
Motor
Tray 3
Motor
(If installed)
Main Fan
SMPS Fan
Duplex Fan
Solenoid/ Tray 1
Clutch Solenoid
Tray 2
Solenoid
Tray 3
Solenoid
Phaser® 3500 Laser Printer Service Manual
Description/Function
Developer motor runs when
the OK button is pressed
and stops when the Cancel
button is pressed.
Laser motor runs when the
OK button is pressed and
stops when the Cancel
button is pressed.
Duplex motor runs when the
OK button is pressed and
stops when the Cancel
button is pressed.
Tray 3 motor runs when the
OK button is pressed and
stops when the Cancel
button is pressed.
If Tray 3 is not installed, test
does not run.
Main fan runs when the OK
button is pressed and stops
when the Cancel button is
pressed.
SMPS fan runs when the
OK button is pressed and
stops when the Cancel
button is pressed.
Duplex fan runs when the
OK button is pressed and
stops when the Cancel
button is pressed
When the OK button is
pressed the Tray 1 solenoid
is turned on for 200ms, and
then it automatically stops.
When the OK button is
pressed the Tray 2 solenoid
is turned on for 200ms, and
then it automatically stops.
When the OK button is
pressed the Tray 3 solenoid
is turned on for 200ms, and
then it automatically stops.
When Tray 3 is not installed,
this function does not work.
2-6
Repair Analysis Procedures
Control Panel Display
DEV Motor
Running Test
ON/OFF
Laser Motor
Running Test
ON/OFF
Duplex Motor
Running Test
ON/OFF
Tray 3 Motor
Running Test
ON/OFF
Tray 3 Not Installed
Main Fan
Running Test
ON/OFF
SMPS Main
Running Test
ON/OFF
Duplex Fan
Running Test
ON/OFF
Tray 1 Solenoid
ON/OFF
Tray 2 Solenoid
ON/OFF
Tray 3 Solenoid
ON/OFF
Tray 3 Not Installed