Tray 2 Pick-Up Assembly and Rollers
Note:
It is not necessary to remove the entire assembly in order to
remove the Pick Rollers.
1.
Remove:
■
Covers
on page 4-4
■
Left Cover
on page 4-5
■
Top Cover
on page 4-8
■
Tray 1 (MPT) Assembly
■
Inner Cover
on page 4-16
■
Main Drive Assembly and Registration (Feed) Clutch
■
Tray 2 and Tray 3 (if installed)
2.
Release the latch on the pick-up cam and slide off the right side of the shaft.
Phaser® 3500 Laser Printer Service Manual
on page 4-12
2
1
Gear-Pick Up Cam
4-29
Repairs and Adjustments
on page 4-24
s3500-124