Table of Contents
Advertisement
5.2
Solutions flowchart – Fera Ultrasound
Check ignition cable is hanging
free, and not clamped against an
Is ignition sparking?
No
iron component, or this sparks
continuously.
Yes
Does the pilot light
Check that the gas tap is turned
come on when
No
on, or whether there is a blockage
ignition button is pushed
in the gas supply.
in?
Yes
Does the pilot light stay
on when ignition
The thermocouple is broken.
No
button is released after
Contact your dealer.
20 seconds?
Yes
Is the ignition knob turned on
Burner bed comes on.
No
fully? (It must be turned to the
large flame)
Yes
Yes
There may be turbulence in the
pilot light, which means it is being
blown away. This could be
because the chips are lying in
front of the pilot light. Reposition
them and try again.
The remote control
Check batteries in the transmitter
No
reacts well.
and receiver are charged.
Yes
The Fura burns very blue.
Check the flue
(It needs ±30 minutes in
connection; does this comply
Yes
order to heat up completely)
with Kal-Fire's installation
conditions?
No
Please contact your dealer
about other problems.
49
Check whether distance between
ionization pen and thermocouple is not
No
too great to spark across. If necessary
bend closer.
No
No
No
No
Contact your
Yes
dealer.
5.3
Solutions flowchart – Fera Radio
Is a red lamp alight (reset knob) on the
Is ignition sparking?
No
gas control unit or does the fire not react? haard
No
Can you hear a click when you press wanneer u op de
the remote control?
Yes
Yes
Check ignition cable is hanging free and is
not clamped against an iron component
or this sparks continuously.
Check that the gas tap is turned on,
Ignition sparks but does the
No
or whether there is a blockage in the
pilot light come on?
gas supply.
Yes
Ignition sparks and pilot
light comes on, but does it
No
Does pilot light go out directly?
also stay on?
No
Yes
There may be turbulence in the
pilot light, which means it is being
blown away. This could be
Burner bed comes on.
No
because the chips are lying in front
of the pilot light. Reposition them
and try again.
Yes
The Fura burns very blue.
Check the flue connection;
(It needs ±30 minutes in
does this comply with Kal-Fire's
YesJa
order to heat up completely)
installation conditions?
No
Please contact your dealer
about other problems.
Press this reset knob in or use the
remote control (see Chapter 3.3.1). At the
Yes
beginning this may occur because there is komen omdat er
air in the pipe. Does this work ?
On the black box of the gas control unit is a
large black knob, press this in simultaneously
No
with the remote control knobs. This will afstandbediening
No
synchronize the receiver and transmitter.
Does this work?
Check whether distance between
ionization pen and thermocouple is not too groot
No
No
too great to spark across. If necessary,
bend closer.
No
The gas control unit is phase-sensitive, so
turn the plug round and check whether the
Yes
electric socket is earthed and connected
No
correctly, the earth is essential for
proper operation, does this work?
Contact your dealer.
Yes
50
Hide quick links:
Advertisement
Table of Contents
