Table of Contents
Advertisement
47
5 Troubleshooting
5.1
Solutions flowchart – Fera manual control
Check that ignition cable is
hanging free and not clamped
Is ignition sparking?
No
against an iron component, or
this sparks continuously.
Yes
Does the pilot light come
Check that the gas tap is turned
on when ignition
No
on, or whether there is a blockage
button is held pushed in?
in the gas supply.
Yes
Does the pilot light stay
on when ignition
The thermocouple is broken.
No
button is released after
Contact your dealer.
20 seconds?
Yes
Is the ignition knob turned on
Burner bed comes on
No
fully? (It must be turned to
the big flame)
Yes
There may be turbulence in the
pilot light, which means it is being
Yes
blown away. This could be
because the chips are lying in
front of the pilot light. Reposition
them and try again.
The Fura burns very blue.
Check the flue
(It needs ±30 minutes in
connection: does this comply
Yes
order to heat up
with Kal-Fire's installation
conditions?
completely.)
No
Please contact your dealer
about other problems.
48
Check whether the distance between
ionization pen and thermocouple is not
No
too great to spark across. If necessary,
bend closer.
No
No
No
Contact your dealer.
Yes
Hide quick links:
Advertisement
Table of Contents
