Assembling The Front Fork Legs - Yamaha YP250R 2005 Service Manual

1
2
FRONT FORK
3. Check:
• damper rod 1
Damage/wear → Replace.
Obstruction → Blow out all of the oil pas-
sages with compressed air.
• oil flow stopper 2
Damage → Replace.
CAUTION:
When disassembling and assembling the
front fork leg, do not allow any foreign
material to enter the front fork.
EAS06590

ASSEMBLING THE FRONT FORK LEGS

The following procedure applies to both of the
front fork legs.
WARNING
• Make sure the oil levels in both front fork
legs are equal.
• Uneven oil levels can result in poor han-
dling and a loss of stability.
NOTE:
• When assembling the front fork leg, be sure
to replace the following parts:
- outer tube bushing
- inner tube bushing
- oil seal
- dust seal
- O-ring
- clip
• Before assembling the front fork leg, make
sure all of the components are clean.
4 - 53
CHAS