Replacing The Rear Brake Pads - Yamaha YP250R 2005 Service Manual

FRONT AND REAR BRAKES
5. Check:
• brake fluid level
Below the minimum level mark a → Add
the recommended brake fluid to the proper
level.
a
Refer to "CHECKING THE BRAKE FLUID
LEVEL" in chapter 3.
6. Check:
• brake lever operation
Soft or spongy feeling → Bleed the brake
system.
Refer to "BLEEDING THE HYDRAULIC
BRAKE SYSTEM" in chapter 3.
EAS05830

REPLACING THE REAR BRAKE PADS

NOTE:
When replacing the brake pads, it is not neces-
sary to disconnect the brake hose or disas-
semble the brake caliper.
1. Remove:
• brake caliper retaining bolts 1
• brake caliper 2
• brake pads
(along with the brake pad shims)
• brake caliper bracket 3
• brake pad supports
2. Measure:
• brake pad wear limit a
Out of specification → Replace the brake
pads as a set.
4 - 17
CHAS
Brake pad wear limit
0.8 mm (0.03 in)