Subaru 2001 LEGACY Service Manual page 95

2) Check brake drum for wear, dents or other
damage. If the inside surface of brake drum is
streaked, correct the surface with emery cloth
(#200 or more). If it is unevenly worn, tapered, or
the outside surface of brake drum is damaged,
correct or replace it.
Brake drum inside diameter
Standard value: 170 mm (6.69 in)
Wear limit: 171 mm (6.73 in)
3) If the deformation or wear of back plate, shoe,
etc. is noticeable, replace them.
4) When the shoe return spring tension is exces-
sively weakened, replace it, taking care to identify
upper and lower springs.
BRAKE LININGS AND DRUMS
GI0062A
PM-35
Periodic Maintenance Services
B: ADJUSTMENT
1. REAR DRUM BRAKE
The main brake is adjusted automatically, and so
there is no need to adjust it.
2. PARKING BRAKE (REAR DISC BRAKE)
SA07696A0102
For rear disc brake, adjust parking brake after
bleeding the air.
1) Remove rear cover (rubber) installed at back
plate.
2) Turn adjuster toward arrow mark (upward) until
it is locked slightly, by using slot-type screwdriver
as shown in illustration.
3) Turn back (downward) adjuster 3 to 4 notches.
4) Install cover (rubber) at original position cor-
rectly.
SA07696A01
SA07696A0101
GI0063A