Engine Oil Specification - Skoda Citigo Owner's Manual

Wheel base
Track gauge front/rear
a)
Valid for vehicles with rear side doors.
b)
The value corresponds to the status with the Green tec package.

Engine oil specification

The grade of engine oil should be selected in accordance with pre-
cise specifications.
The engine of your vehicle has been factory-filled with a high-grade oil which you
can use throughout the year - except in extreme climatic regions.
You can mix various oils together with each other when refilling with oil.
Engine oils are, of course, undergoing continuous further development. Thus the
information stated in this Owner's Manual is only correct at the time of publica-
tion.
Specialist garages are informed by ŠKODA about the latest changes. We recom-
mend having this oil change undertaken by a specialist garage.
The specifications (VW standards) stated in the following must be indicated sepa-
rately or together with other specifications on the bottle.
Engine oil specifications
Engine
1.0 l/44 kW - EU5
1.0 l/55 kW - EU5
a)
Oil capacity with oil filter change. Inspect oil level when filling; do not fill up too much. The oil level
must be between the markings ⇒ p age 110, Checking the engine oil level.
Note
● Before a long drive we recommend that you purchase and carry with you en-
gine oil which complies with the specification for your vehicle. Consequently, you
will always have the correct engine oil for refilling.
● We recommend using oils from the ŠKODA Original Parts.
● For further information - see Service schedule.
Using the system Safety
2420
1428/1424
Specification Filling level
VW 502 00 3,4
VW 502 00 3,4
Driving Tips

a)

General Maintenance
Technical data
Do-it-yourself Technical data
147