Skoda Citigo Owner's Manual page 130

Slackening and tightening wheel bolts
Slacken the wheel bolts before jacking up the vehicle.
Fig. 104 Changing a wheel: Loosening the wheel bolts/installation location of the anti-theft
wheel bolt
Slackening wheel bolts
– Insert the wheel wrench fully onto the wheel bolt
Grasp the end of the wrench and turn the bolt about one turn in the direction
–
⇒ F ig. 104
of the arrow - .
After raising the vehicle ⇒ p age 130 fully unscrew the loosened wheel bolts
–
with the hexagon socket in the screwdriver handle
Tightening wheel bolts
Screw the wheel bolts in a clockwise direction with the hexagon socket in the
–
screwdriver handle and tighten them slightly.
Use the appropriate adapter for slackening and tightening the anti-theft wheel bolts ⇒ p age 130.
1)
Using the system Safety
Fig. 105 Changing a wheel: Loosen the
wheel bolts using the hexagon socket in
the screwdriver handle.
1)
.
⇒ F ig.
105.
Driving Tips
Insert the wheel wrench fully onto the wheel bolt
–
Grasp the end of the wrench and turn the bolt clockwise until it is tight.
–
The anti-theft wheel bolt must be screwed with a wheel with full wheel trim at
⇒ F ig. 105
position 2  opposite the valve
not be installed.
WARNING
Slacken the wheel bolts only a little (about one turn) as long as the vehicle has
not yet been jacked up - risk of an accident!.
Note
● Apply pressure carefully with your foot to the end of the wrench if it proves
difficult to slacken the bolts. Hold tight on the vehicle when doing this and ensure
that you have a steady position.
General Maintenance Do-it-yourself
Do-it-yourself
1)
.
1 . Otherwise the full wheel trim can-
Technical data
129
