Using Quick Wireless Connection (Windows Only) - Epson BrightLink Pro 1420Wi User Manual

4. Replace the cable cover and tighten the screws.
5. Plug in and turn on the projector.
Parent topic:

Using Quick Wireless Connection (Windows Only)

You can use the Quick Wireless Connection USB Key to quickly connect the projector to a Windows
computer wirelessly. Then you can project your presentation and remove the key when you are done.
Note: The Quick Wireless Connection USB Key is not included with your projector.
1. Turn on the projector.
2. Connect the USB key to the projector's USB-A port.
Note: If the control pad is connected to the projector, you can also connect the USB key to the USB-
A port on the control pad, as shown:
You see a projected message that the network information update is complete.
3. Remove the USB key.
4. Connect the USB key to a USB port on your computer or laptop.
Note: In Windows Vista, if you see the AutoPlay window, select Run LaunchU3.exe, then select
Allow on the next screen.
Wireless Network Projection
91