Epson BrightLink Pro 1420Wi User Manual page 204

4. Select Mail and press Enter.
5. Select the following options for emailing as necessary:
• SMTP Server let you enter the IP address or host name for the mail server. You can enter up to
63 alphanumeric characters. If you specify a host name, you must configure a DNS server.
Note: You cannot use the following IP addresses: 127.x.x.x, 192.0.2.x, or 224.0.0.0 to
255.255.255.255.
• Authentication lets you set the type of authentication expected by the mail server
• Port Number lets you enter a port number for the SMTP server. The default port is 25.
• User name lets you enter a user name for the mail server. You can enter up to 64 alphanumeric
characters.
• Password lets you enter a password for the mail server. You can enter up to 64 alphanumeric
characters.
• From lets you enter the email address to be displayed to the sender. You can enter up to 64
alphanumeric characters.
• Default e-mail address lets you enter an optional address for testing. You can enter up to 64
alphanumeric characters.
204