Connecting A Usb Device To The Control Pad Or Projector; Selecting The Connected Usb Source; Disconnecting A Usb Device From The Control Pad Or Projector - Epson BrightLink Pro 1420Wi User Manual

Connecting a USB Device to the Control Pad or Projector

You can connect your USB device to the USB-A port on the control pad or projector and use it to project
images and other content.
1. If your USB device came with a power adapter, plug the device into an electrical outlet.
2. Make sure a USB cable is connected between the USB-A port on the projector and the USB-B port
on the control pad.
3. Connect the USB cable for the device (or USB flash drive or USB memory card reader) into the
USB-A port on the bottom of the control pad.
4. Connect the other end of the cable (if applicable) to your device.
Note: You can also connect a USB device directly to the projector's USB-A port.
Parent topic:

Selecting the Connected USB Source

You can switch the projector's display to the source you connected to the USB-A port on the control pad
or the projector.
1. Make sure the connected USB source is turned on, if necessary.
2. Press the Source Search button on the remote control or control pad, then select USB1.
Parent topic:

Disconnecting a USB Device From the Control Pad or Projector

When you finish presenting with a connected USB device, you must prepare to disconnect the device
from the control pad or projector.
Connecting to External USB Devices
Connecting to External USB Devices
74