Removing And Attaching The Cable Cover; Adjusting The Angle Of The Touch Unit - Epson BrightLink Pro 1420Wi User Manual

Parent topic:

Removing and Attaching the Cable Cover

Before you can connect equipment to your projector, you need to remove the cable cover.
1. Remove both of the cable cover screws (screwdriver not included).
2. Slide off the cable cover.
To attach the cable cover, slide it into position and tighten the screws.
Parent topic:

Adjusting the Angle of the Touch Unit

You can adjust the angle of the Touch Unit to detect the position of your fingers.
Projector Placement
Setting Up the Projector
39