Using The Projector Help Displays - Epson BrightLink Pro 1420Wi User Manual

Power light
Off
Off
Off
Off
Note: If the lights display a pattern not listed in the table above, turn the projector off, unplug it, and
contact Epson for help.
Parent topic:

Using the Projector Help Displays

You can display information to help you solve common problems using the projector's Help system.
1. Turn on the projector.
2. Press the Help button on the projector or the remote control.
You see the Help menu.
Status light Lamp light Temp light
Flashing blue Off
Flashing blue Flashing
orange
Flashing blue Orange
Flashing blue Flashing
orange
Solving Problems
Status and solution
Flashing A fan or sensor has a problem. Turn
orange the projector off, unplug it, and
contact Epson for help.
Flashing Auto Iris error. Turn the projector off,
orange unplug it, and contact Epson for help.
Orange Power error (ballast). Turn the
projector off, unplug it, and contact
Epson for help.
Obstacle detection error. A message
is displayed: "For safety purposes
remove any obstacles blocking the
lens."
• Remove any obstacles.
• Clean the obstacle sensor.
• If the detection error continues, turn
the projector off, unplug it, and
contact Epson for help.
Off Internal projector error. Turn the
projector off, unplug it, and contact
Epson for help.
280