Yamaha RX-V575 Owner's Manual page 62

■
CODE SET CODE SET
SOURCE RECEIVER
SOURCE/RECEIVER
1
HDMI
1 2 3 4
Input selection keys
MHL
1 2 3 5
AV
4 5 6 A
ZONE A
V-AUX USB NET B
ZONE B
ZONE
AUDIO
TUNER TUNER
FM FM AM AM
PRESET PRESET TUNING TUNING
INFO INFO MEMORY MEMORY
MOVIE MOVIE MUSIC MUSIC SUR. DECODE SUR. DECODE STRAIGHT STRAIGHT
SCENE (BD/DVD)
ENHANCER ENHANCER DIRECT DIRECT
SLEEP SLEEP
SCENE (TV)
SCENE SCENE
2
BD OPTION
TV NET NET RADIO RADIO
DVD
SETUP SETUP OPTION
VOLUME
ENTER VOLUME
3
RETURN DISPLAY DISPLAY
TOP TOP POP-UP POP-UP
MUTE
MUTE
MENU MENU MENU MENU
4
Cursor keys
MODE MODE
ENTER
RETURN
1 1 2 2 3 3 4 4
■
5 5 6 6 7 7 8 8
9 9 0 0 10 10 ENT ENT
TV TV
INPUT INPUT
If you are bothered by volume difference between Zone A/B, follow
TV VOL TV VOL TV CH TV CH
MUTE MUTE
the procedure below to adjust the volume for Zone B.
1
2
Basic playback procedure
Press ZONE A or ZONE B to enable/disable audio
output to Zone A or Zone B.
"SP A" lights up in the front display when the Zone A output
is enabled and "SP B" lights up when the Zone B output is
enabled.
"SP A" and/or "SP B" light up
VOL.
SP A
SP B
HDMI1
Use the input selection keys to select an input
source.
Start playback on the external device or select a
radio station.
Press VOLUME to adjust the volume.
Correcting volume difference between
Zone A and Zone B
Press OPTION.
Use the cursor keys to select "Volume Trim"
(Volume Trim) and press ENTER.
• To return to the previous screen during menu operations, press RETURN.
• Text in parentheses denotes indicators on the front display.
3
Use the cursor keys (q/w) to select "ZoneB Trim"
(ZB.Trim) and the cursor keys (e/r) to adjust the
setting.
Setting range
-10.0 dB to +10.0 dB (0.5 dB increments)
Default
0.0 dB
4
To exit from the menu, press OPTION.
SW
C
L R
SL SR
• This setting is not effective when "ZoneB Volume" (p.77) in the "Setup" menu is set
to "Async.".
■
Adjusting the volume for Zone B
separately
You can separately adjust the volume for Zone B using the remote
control when "ZoneB Volume" (p.77) in the "Setup" menu is set to
"Async.".
1
To set the remote control to the Zone B operation
mode, while holding down the cursor key (r), hold
down SCENE (TV) for more than 3 seconds.
SOURCE/RECEIVER blinks twice.
2
Press VOLUME to adjust the volume for Zone B.
• To mute the audio output to Zone B, press MUTE.
3
To set the remote control to the Zone A operation
mode, while holding down the cursor key (r), hold
down SCENE (BD/DVD) for more than 3 seconds.
SOURCE/RECEIVER blinks twice.
PLAYBACK ➤ Playing back music in multiple rooms (RX-V575 only)
62
En