Solid Surface Material - Four winns 338 Vista Owner's Manual

This woodgrain enhancement may be found in the
trim tabs panel and ignition switch panels. To clean, a
damp, clean cloth will usually suffice. See Figure Q3.
Figure Q3: Woodgrain Helm
Q - 6 SOLID SURFACE MATERIAL
Solid surface material is utilized in the galley counter-
top, refreshment center countertop and head sink
countertop of the 338 Vista
gives these countertops a rich look and makes for an
extremely strong yet lightweight top. It can be cleaned
with hand dish washing soap and water. Al ways read
the label before using any product. See Figures Q4,
Q5 and Q6.
Figure Q4: Galley Countertop
Woodwork and Composites - Section Q
models. The solid surface
®
Figure Q5: Refreshment Center
Figure Q6: Head Sink w/ Hard Surface Countertop
NOTICE
DO NOT use abrasive cleaners or sol vents on
countertop. DO NOT use Soft Scrub™ soap or
similar cleaning prod ucts; they will scratch the
surface and remove the shine.
NOTICE
DO NOT set hot pans or dishes directly on the
countertop. The countertop may become burnt
and/or discolored. Use of a hot pad will prevent
any discoloration from occurring.
NOTICE
DO NOT use countertop as a cutting board.
The knife will leave gouges/marks in the
surface of the countertop. A cutting board that
fits over the sink is provided.
Owner's Manual Page 169