Sharp MX-2010U Installation Manual page 94

10) Insert the open/close cover into the fulcrum shaft, and fix it with
the clip.
2
1
11) Attach the fulcrum cover and fix it with the screw (M3 x 6 S
tight).
2
1
12) Attach the protection sheet to the bottom of the operation
panel.
20/23cpm machine
Edge reference
0 - 3mm
R end reference
0 - 3mm
26/31/36cpm machine
Edge reference
0 - 3mm
R end reference
0 - 3mm
D. External fixture attachment
1) Remove the left cabinet upper rear from the left cabinet upper.
3
2) Attach the left cabinet upper.
3) Attach the left cabinet.
4) Attach the take-up roller and fix it with the screw (M4 x 7 S
tight).
MX-3610N MX-FN17 (FINISHER) 22 – 4
1
2
1
1
2
2